diff options
Diffstat (limited to 'mock/site-defaults.cfg')
| -rw-r--r-- | mock/site-defaults.cfg | 311 |
1 files changed, 0 insertions, 311 deletions
diff --git a/mock/site-defaults.cfg b/mock/site-defaults.cfg deleted file mode 100644 index 8c2c6f6..0000000 --- a/mock/site-defaults.cfg +++ /dev/null @@ -1,311 +0,0 @@ -# mock defaults -# vim:tw=0:ts=4:sw=4:et: -# -# If you want to alter just some setting for one user, you can put the -# configuration in: -# ~/.config/mock.cfg -# -# This config file is for site-specific default values that apply across all -# configurations. Options specified in this config file can be overridden in -# the individual mock config files. -# -# The site-defaults.cfg delivered by default has NO options set. Only set -# options here if you want to override the defaults. -# -# It's possible to use include statement in order to make one config included to another: -# include('/path/to/included/config.cfg') -# -# Entries in this file follow the same format as other mock config files. -# config_opts['foo'] = bar - -############################################################################# -# -# Things that we recommend you set in site-defaults.cfg: -# -# config_opts['basedir'] = '/var/lib/mock/' -# config_opts['cache_topdir'] = '/var/cache/mock' -# Note: the path pointed to by basedir and cache_topdir must be owned -# by group 'mock' and must have mode: g+rws -# config_opts['rpmbuild_timeout'] = 0 -# config_opts['use_host_resolv'] = True - -# You can configure log format to pull from logging.ini formats of these names: -# config_opts['build_log_fmt_name'] = "unadorned" -# config_opts['root_log_fmt_name'] = "detailed" -# config_opts['state_log_fmt_name'] = "state" -# -# mock will normally set up a minimal chroot /dev. -# If you want to use a pre-configured /dev, disable this and use the bind-mount -# plugin to mount your special /dev -# config_opts['internal_dev_setup'] = True -# -# internal_setarch defaults to 'True' if the python 'ctypes' package is -# available. It is in the python std lib on >= python 2.5. On older versions, -# it is available as an addon. On systems w/o ctypes, it will default to 'False' -# config_opts['internal_setarch'] = False -# -# the cleanup_on_* options allow you to automatically clean and remove the -# mock build directory, but only take effect if --resultdir is used. -# config_opts provides fine-grained control. cmdline only has big hammer -# -# config_opts['cleanup_on_success'] = 1 -# config_opts['cleanup_on_failure'] = 1 - -# The build user's homedir is partially cleaned up even when --no-clean is -# specified in order to prevent garbage from previous builds from altering -# successive builds. Mock can be configured to exclude certain files/directories -# from this. Default is SOURCES directory to support nosrc rpms. Paths are -# relative to build user's homedir -# config_opts['exclude_from_homedir_cleanup'] = ['build/SOURCES'] - -# By default Mock use simple chroot(1). When you set this to True -# it will use systemd-nspawn(1) -# config_opts['use_nspawn'] = False -# If you're using nspawn, then by default networking will be turned off -# for rpmbuild. This helps ensure more reproducible builds. -# config_opts['rpmbuild_networking'] = False -## When RPM is build in container then build hostname is set to name of -## container. This sets the build hostname to name of container's host. -## Works only in F25+ chroots -# config_opts['use_container_host_hostname'] = True - -# The default package manager is Yum -# config_opts['package_manager'] = 'yum' -# If you want to use DNF, set it to 'dnf'. To use DNf you need to have dnf and -# dnf-plugins-core installed - -# You can configure Yum, DNF, rpm and rpmbuild executable paths if you need to -# use different versions that the system-wide ones -# config_opts['yum_command'] = '/usr/bin/yum' -# config_opts['yum_builddep_command'] = '/usr/bin/yum-builddep' -# config_opts['dnf_command'] = '/usr/bin/dnf' -# config_opts['rpm_command'] = '/bin/rpm' -# config_opts['rpmbuild_command'] = '/usr/bin/rpmbuild' -# config_opts['target_dir'] = '/var/cache/%(package_manager)s/' -# -# By default a Yum/DNF update is performed before each rebuild -# config_opts['update_before_build'] = True - -# if you want mock to automatically run createrepo on the rpms in your -# resultdir. -# config_opts['createrepo_on_rpms'] = False -# config_opts['createrepo_command'] = '/usr/bin/createrepo_c -d -q -x *.src.rpm' - -# if you want mock to backup the contents of a result dir before clean -# config_opts['backup_on_clean'] = False -# config_opts['backup_base_dir'] = config_opts['basedir'] + "backup" - -# if you want to speed up the package installation and the build process, mock -# can use nosync library to skip fsync and related calls from programs called -# from within mock. It needs nosync library to be installed and for multilib -# target, it requires both architectures of nosync to be present. If these -# conditions aren't met, it won't be enabled -# config_opts['nosync'] = False -# if you cannot or don't want to install both architectures of nosync and still -# want mock to use it, you can force it, but then expect a lot of (generally -# harmless) error messages from ld.so when a 32bit program is executed -# config_opts['nosync_force'] = False - -# By default Mock unshare namespace so it is different from your other application -# in unpriviliged container, this is skipped. We will warn you that running mock -# and some other applications in the same container is not good idea and -# can be security risk. If you are fully aware of this risk or mock is your -# only one application in that container you can disable the warning here. -# config_opts['docker_unshare_warning'] = True - -############################################################################# -# -# plugin related. Below are the defaults. Change to suit your site -# policy. site-defaults.cfg is a good place to do this. -# -# NOTE: Some of the caching options can theoretically affect build -# reproducability. Change with care. -# -# config_opts['plugin_conf']['package_state_enable'] = True -# config_opts['plugin_conf']['package_state_opts'] = {} -# config_opts['plugin_conf']['package_state_opts']['available_pkgs'] = False -# config_opts['plugin_conf']['package_state_opts']['installed_pkgs'] = True -# config_opts['plugin_conf']['ccache_enable'] = False -# config_opts['plugin_conf']['ccache_opts'] = {} -# config_opts['plugin_conf']['ccache_opts']['max_cache_size'] = '4G' -# config_opts['plugin_conf']['ccache_opts']['compress'] = None -# config_opts['plugin_conf']['ccache_opts']['dir'] = "%(cache_topdir)s/%(root)s/ccache/u%(chrootuid)s/" -# config_opts['plugin_conf']['yum_cache_enable'] = True -# config_opts['plugin_conf']['yum_cache_opts'] = {} -# config_opts['plugin_conf']['yum_cache_opts']['max_age_days'] = 30 -# config_opts['plugin_conf']['yum_cache_opts']['max_metadata_age_days'] = 30 -# config_opts['plugin_conf']['yum_cache_opts']['dir'] = "%(cache_topdir)s/%(root)s/%(package_manager)s_cache/" -# config_opts['plugin_conf']['yum_cache_opts']['target_dir'] "/var/cache/%(package_manager)s/" -# config_opts['plugin_conf']['yum_cache_opts']['online'] = True -# config_opts['plugin_conf']['root_cache_enable'] = True -# config_opts['plugin_conf']['root_cache_opts'] = {} -# config_opts['plugin_conf']['root_cache_opts']['age_check'] = True -# config_opts['plugin_conf']['root_cache_opts']['max_age_days'] = 15 -# config_opts['plugin_conf']['root_cache_opts']['dir'] = "%(cache_topdir)s/%(root)s/root_cache/" -# config_opts['plugin_conf']['root_cache_opts']['compress_program'] = "pigz" -# config_opts['plugin_conf']['root_cache_opts']['extension'] = ".gz" -# config_opts['plugin_conf']['root_cache_opts']['exclude_dirs'] = ["./proc", "./sys", "./dev", -# "./tmp/ccache", "./var/cache/yum" ] -# -# bind mount plugin is enabled by default but has no configured directories to -# mount -# config_opts['plugin_conf']['bind_mount_enable'] = True -# config_opts['plugin_conf']['bind_mount_opts']['dirs'].append(('/host/path', '/bind/mount/path/in/chroot/' )) -# -# config_opts['plugin_conf']['tmpfs_enable'] = False -# config_opts['plugin_conf']['tmpfs_opts'] = {} -# config_opts['plugin_conf']['tmpfs_opts']['required_ram_mb'] = 1024 -# config_opts['plugin_conf']['tmpfs_opts']['max_fs_size'] = '768m' -# config_opts['plugin_conf']['tmpfs_opts']['mode'] = '0755' -# config_opts['plugin_conf']['tmpfs_opts']['keep_mounted'] = False -# -# config_opts['plugin_conf']['chroot_scan_enable'] = False -# config_opts['plugin_conf']['chroot_scan_opts'] = { -## Regexp of files which should be copied from buildroot to resultdir. -# 'regexes': [ "^[^k]?core(\.\d+)?", "\.log$",], -## If set to True files are copied only if build failed. -# 'only_failed': True, -#} -# -# lvm_root plugin is not enabled by default and is distributed in separate -# subpackage mock-lvm. If you want to use it, it's recommended to disable the -# root_cache plugin, otherwise you'd be caching twice. -# config_opts['plugin_conf']['lvm_root_enable'] = False -# config_opts['plugin_conf']['lvm_root_opts'] = {} -# You need to give it a volume group with sufficient space. It won't touch any -# of the existing logical volumes, so you can use the same volume group you use -# for other purposes. It requires a name of the VG (not device path). -# config_opts['plugin_conf']['lvm_root_opts']['volume_group'] = 'my_vg' -# You need to specify the size that will mock's thinpool occupy. For regular -# packages with small set of dependencies, 2G should suffice. For large packages -# such as libreoffice, you should set it to at least 5 GB otherwise you may run -# out of space and the build process will be blocked -# config_opts['plugin_conf']['lvm_root_opts']['size'] = '2G' -# You can specify alternative pool metadata size, format is the same as size. -# Default value is determined by lvcreate based on size -# config_opts['plugin_conf']['lvm_root_opts']['poolmetadatasize'] = None -# When thin pool utilization is over 90% mock will refuse to continue. -# Because once it reach 100% utilization weird things will happens. -# config_opts['plugin_conf']['lvm_root_opts']['check_size'] = True - -### pm_request plugin can install packages requested from within the buildroot -# It is disabled by default, as it affects build reproducibility. It can be enabled -# by setting the following to True, but it's not advised to have it enabled globally. -# It's better to enable it per build by using --enable-plugin pm_request -# config_opts['plugin_conf']['pm_request_enable'] = False -# config_opts['plugin_conf']['pm_request_opts'] = {} - -### If you want to compress mock log, enable this plugin -# config_opts['plugin_conf']['compress_logs_enable'] = False -# config_opts['plugin_conf']['compress_logs_opts'] = {} -### Command used to compress logs - e.g. "/usr/bin/xz -9 --force" -# config_opts['plugin_conf']['compress_logs_opts']['command'] = "" -# -# Configuration options for the sign plugin: -# config_opts['plugin_conf']['sign_enable'] = False -# config_opts['plugin_conf']['sign_opts'] = {} -# config_opts['plugin_conf']['sign_opts']['cmd'] = 'rpmsign' -# The options to pass to the signing command. %(rpms)s will be expanded to -# the rpms in the results folder. -# config_opts['plugin_conf']['sign_opts']['opts'] = '--addsign %(rpms)s -D "%%_gpg_name your_name" -D "%%_gpg_path /home/your_name/.gnupg' - -############################################################################# -# -# environment for chroot -# -# config_opts['environment']['TERM'] = 'vt100' -# config_opts['environment']['SHELL'] = '/bin/bash' -# config_opts['environment']['HOME'] = '/builddir' -# config_opts['environment']['HOSTNAME'] = 'mock' -# config_opts['environment']['PATH'] = '/usr/bin:/bin:/usr/sbin:/sbin' -# config_opts['environment']['PROMPT_COMMAND'] = 'printf "\\033]0;<mock-chroot>\\007"' -# config_opts['environment']['PS1'] = '<mock-chroot> \\s-\\v\\$ ' -# config_opts['environment']['LANG'] = os.environ.setdefault('LANG', 'en_US.UTF-8') -# config_opts['environment']['TZ'] = os.environ.setdefault('TZ', 'EST5EDT') - -############################################################################# -# -# Things that you can change, but we dont recommend it: -# config_opts['chroothome'] = '/builddir' -# config_opts['clean'] = True -## you could not really use substitution here so it will not work if overridden: -# config['rootdir'] = '/var/lib/mock/<CONFIG>/root/' -## This works in F25+ chroots. This overrides 'use_container_host_hostname' option -# config_opts['macros']['%_buildhost'] = 'my.own.hostname' - -############################################################################# -# -# Things that must be adjusted if SCM integration is used: -# -# config_opts['scm'] = True -# config_opts['scm_opts']['method'] = 'git' -# config_opts['scm_opts']['cvs_get'] = 'cvs -d /srv/cvs co SCM_BRN SCM_PKG' -# config_opts['scm_opts']['git_get'] = 'git clone SCM_BRN git://localhost/SCM_PKG.git SCM_PKG' -# config_opts['scm_opts']['svn_get'] = 'svn co file:///srv/svn/SCM_PKG/SCM_BRN SCM_PKG' -# config_opts['scm_opts']['spec'] = 'SCM_PKG.spec' -# config_opts['scm_opts']['ext_src_dir'] = '/dev/null' -# config_opts['scm_opts']['write_tar'] = True -# config_opts['scm_opts']['git_timestamps'] = True -# config_opts['scm_opts']['exclude_vcs'] = True - -# These options are also recognized but usually defined in cmd line -# with --scm-option package=<pkg> --scm-option branch=<branch> -# config_opts['scm_opts']['package'] = 'mypkg' -# config_opts['scm_opts']['branch'] = 'master' - -############################################################################# -# -# Things that are best suited for individual chroot config files: -# -# MUST SET (in individual chroot cfg file): -# config_opts['root'] = 'name-of-yum-build-dir' -# Mock will set architecture to 'target_arch' using personality(2) syscall. -# config_opts['target_arch'] = 'i386' -# When host system architecture is not in 'legal_host_arches' list, mock will refuse to switch to -# 'target_arch' and will raise error. -# config_opts['legal_host_arches'] = ('i386', 'i586', 'i686', 'x86_64') -# Contains content of $CHROOT/etc/yum/yum.conf or $CHROOT/etc/dnf/dnf.conf. If DNF is used and -# 'dnf.conf' is not set, then content of 'yum.conf' is used to populate $CHROOT/etc/dnf/dnf.conf -# config_opts['yum.conf'] = '' -# or -# config_opts['dnf.conf'] = '' -# Important! You must use 'assumeyes=1' in yum/dnf.conf otherwise Mock will fail. -# -# Flip this if you want to get rid of warning message on systems which does not support DNF -# Warning! Setting this to False will automatically use Yum on RHEL{6,7} platforms. -# config_opts['dnf_warning'] = True -# -# CAN SET, defaults usually work ok: -# config_opts['chroot_setup_cmd'] = 'install buildsys-build' -# config_opts['chroot_additional_packages'] = '' -# config_opts['log_config_file'] = 'logging.ini' -# config_opts['more_buildreqs']['srpm_name-version-release'] = 'dependencies' -# config_opts['macros']['%Add_your_macro_name_here'] = "add macro value here" -# config_opts['files']['path/name/no/leading/slash'] = "put file contents here." -# config_opts['chrootuid'] = os.getuid() -# config_opts['releasever'] = '20' -# config_opts['yum_common_opts'] = [] -# config_opts['dnf_common_opts'] = ['--disableplugin=local', '--setopt=deltarpm=false'] -# config_opts['yum_builddep_opts'] = '' -# config_opts['dnf_builddep_opts'] = '' -# config_opts['priorities.conf'] = 'put file contents here.' -# config_opts['rhnplugin.conf'] = 'put file contents here.' -# config_opts['subscription-manager.conf'] = 'put file contents here.' - -# If you change chrootgid, you must also change "mock" to the correct group -# name in this line of the mock PAM config: -# auth sufficient pam_succeed_if.so user ingroup mock use_uid quiet -# config_opts['chrootgid'] = grp.getgrnam("mock")[2] - -# config_opts['useradd'] = '/usr/sbin/useradd -m -u %(uid)s -g %(gid)s -d %(home)s -n %(user)s' # Fedora/RedHat -# -# Security related -# config_opts['no_root_shells'] = False -# -# Proxy settings (https_proxy, ftp_proxy, and no_proxy can also be set) -# config_opts['http_proxy'] = 'http://localhost:3128' -# -# Extra dirs to be created when the chroot is initialized -# This is just a list of strings representing chroot paths such as: -# [ '/run/lock', ] -# config_opts['extra_chroot_dirs'] = [] |