tools/mock moved to git.remirepo.net

1 files changed, 0 insertions, 311 deletions

diff --git a/mock/site-defaults.cfg b/mock/site-defaults.cfg
deleted file mode 100644
index 8c2c6f6..0000000
--- a/mock/site-defaults.cfg
+++ /dev/null
@@ -1,311 +0,0 @@
-# mock defaults
-# vim:tw=0:ts=4:sw=4:et:
-#
-# If you want to alter just some setting for one user, you can put the
-# configuration in:
-#    ~/.config/mock.cfg
-#
-# This config file is for site-specific default values that apply across all
-# configurations. Options specified in this config file can be overridden in
-# the individual mock config files.
-#
-# The site-defaults.cfg delivered by default has NO options set. Only set
-# options here if you want to override the defaults.
-#
-# It's possible to use include statement in order to make one config included to another:
-# include('/path/to/included/config.cfg')
-#
-# Entries in this file follow the same format as other mock config files.
-# config_opts['foo'] = bar
-
-#############################################################################
-#
-# Things that we recommend you set in site-defaults.cfg:
-#
-# config_opts['basedir'] = '/var/lib/mock/'
-# config_opts['cache_topdir'] = '/var/cache/mock'
-#  Note: the path pointed to by basedir and cache_topdir must be owned
-#        by group 'mock' and must have mode: g+rws
-# config_opts['rpmbuild_timeout'] = 0
-# config_opts['use_host_resolv'] = True
-
-# You can configure log format to pull from logging.ini formats of these names:
-# config_opts['build_log_fmt_name'] = "unadorned"
-# config_opts['root_log_fmt_name']  = "detailed"
-# config_opts['state_log_fmt_name'] = "state"
-#
-# mock will normally set up a minimal chroot /dev.
-# If you want to use a pre-configured /dev, disable this and use the bind-mount
-# plugin to mount your special /dev
-# config_opts['internal_dev_setup'] = True
-#
-# internal_setarch defaults to 'True' if the python 'ctypes' package is
-# available. It is in the python std lib on >= python 2.5. On older versions,
-# it is available as an addon. On systems w/o ctypes, it will default to 'False'
-# config_opts['internal_setarch'] = False
-#
-# the cleanup_on_* options allow you to automatically clean and remove the
-# mock build directory, but only take effect if --resultdir is used.
-# config_opts provides fine-grained control. cmdline only has big hammer
-#
-# config_opts['cleanup_on_success'] = 1
-# config_opts['cleanup_on_failure'] = 1
-
-# The build user's homedir is partially cleaned up even when --no-clean is
-# specified in order to prevent garbage from previous builds from altering
-# successive builds. Mock can be configured to exclude certain files/directories
-# from this. Default is SOURCES directory to support nosrc rpms. Paths are
-# relative to build user's homedir
-# config_opts['exclude_from_homedir_cleanup'] = ['build/SOURCES']
-
-# By default Mock use simple chroot(1). When you set this to True
-# it will use systemd-nspawn(1)
-# config_opts['use_nspawn'] = False
-# If you're using nspawn, then by default networking will be turned off
-# for rpmbuild.  This helps ensure more reproducible builds.
-# config_opts['rpmbuild_networking'] = False
-## When RPM is build in container then build hostname is set to name of
-## container. This sets the build hostname to name of container's host.
-## Works only in F25+ chroots
-# config_opts['use_container_host_hostname'] = True
-
-# The default package manager is Yum
-# config_opts['package_manager'] = 'yum'
-# If you want to use DNF, set it to 'dnf'. To use DNf you need to have dnf and
-# dnf-plugins-core installed
-
-# You can configure Yum, DNF, rpm and rpmbuild executable paths if you need to
-# use different versions that the system-wide ones
-# config_opts['yum_command'] = '/usr/bin/yum'
-# config_opts['yum_builddep_command'] = '/usr/bin/yum-builddep'
-# config_opts['dnf_command'] = '/usr/bin/dnf'
-# config_opts['rpm_command'] = '/bin/rpm'
-# config_opts['rpmbuild_command'] = '/usr/bin/rpmbuild'
-# config_opts['target_dir'] = '/var/cache/%(package_manager)s/'
-#
-# By default a Yum/DNF update is performed before each rebuild
-# config_opts['update_before_build'] = True
-
-# if you want mock to automatically run createrepo on the rpms in your
-# resultdir.
-# config_opts['createrepo_on_rpms'] = False
-# config_opts['createrepo_command'] = '/usr/bin/createrepo_c -d -q -x *.src.rpm'
-
-# if you want mock to backup the contents of a result dir before clean
-# config_opts['backup_on_clean'] = False
-# config_opts['backup_base_dir'] = config_opts['basedir'] + "backup"
-
-# if you want to speed up the package installation and the build process, mock
-# can use nosync library to skip fsync and related calls from programs called
-# from within mock. It needs nosync library to be installed and for multilib
-# target, it requires both architectures of nosync to be present. If these
-# conditions aren't met, it won't be enabled
-# config_opts['nosync'] = False
-# if you cannot or don't want to install both architectures of nosync and still
-# want mock to use it, you can force it, but then expect a lot of (generally
-# harmless) error messages from ld.so when a 32bit program is executed
-# config_opts['nosync_force'] = False
-
-# By default Mock unshare namespace so it is different from your other application
-# in unpriviliged container, this is skipped. We will warn you that running mock
-# and some other applications in the same container is not good idea and
-# can be security risk. If you are fully aware of this risk or mock is your
-# only one application in that container you can disable the warning here.
-# config_opts['docker_unshare_warning'] = True
-
-#############################################################################
-#
-# plugin related. Below are the defaults. Change to suit your site
-# policy. site-defaults.cfg is a good place to do this.
-#
-# NOTE: Some of the caching options can theoretically affect build
-#  reproducability. Change with care.
-#
-# config_opts['plugin_conf']['package_state_enable'] = True
-# config_opts['plugin_conf']['package_state_opts'] = {}
-# config_opts['plugin_conf']['package_state_opts']['available_pkgs'] = False
-# config_opts['plugin_conf']['package_state_opts']['installed_pkgs'] = True
-# config_opts['plugin_conf']['ccache_enable'] = False
-# config_opts['plugin_conf']['ccache_opts'] = {}
-# config_opts['plugin_conf']['ccache_opts']['max_cache_size'] = '4G'
-# config_opts['plugin_conf']['ccache_opts']['compress'] = None
-# config_opts['plugin_conf']['ccache_opts']['dir'] = "%(cache_topdir)s/%(root)s/ccache/u%(chrootuid)s/"
-# config_opts['plugin_conf']['yum_cache_enable'] = True
-# config_opts['plugin_conf']['yum_cache_opts'] = {}
-# config_opts['plugin_conf']['yum_cache_opts']['max_age_days'] = 30
-# config_opts['plugin_conf']['yum_cache_opts']['max_metadata_age_days'] = 30
-# config_opts['plugin_conf']['yum_cache_opts']['dir'] = "%(cache_topdir)s/%(root)s/%(package_manager)s_cache/"
-# config_opts['plugin_conf']['yum_cache_opts']['target_dir'] "/var/cache/%(package_manager)s/"
-# config_opts['plugin_conf']['yum_cache_opts']['online'] = True
-# config_opts['plugin_conf']['root_cache_enable'] = True
-# config_opts['plugin_conf']['root_cache_opts'] = {}
-# config_opts['plugin_conf']['root_cache_opts']['age_check'] = True
-# config_opts['plugin_conf']['root_cache_opts']['max_age_days'] = 15
-# config_opts['plugin_conf']['root_cache_opts']['dir'] = "%(cache_topdir)s/%(root)s/root_cache/"
-# config_opts['plugin_conf']['root_cache_opts']['compress_program'] = "pigz"
-# config_opts['plugin_conf']['root_cache_opts']['extension'] = ".gz"
-# config_opts['plugin_conf']['root_cache_opts']['exclude_dirs'] = ["./proc", "./sys", "./dev",
-#                                                                  "./tmp/ccache", "./var/cache/yum" ]
-#
-# bind mount plugin is enabled by default but has no configured directories to
-# mount
-# config_opts['plugin_conf']['bind_mount_enable'] = True
-# config_opts['plugin_conf']['bind_mount_opts']['dirs'].append(('/host/path', '/bind/mount/path/in/chroot/' ))
-#
-# config_opts['plugin_conf']['tmpfs_enable'] = False
-# config_opts['plugin_conf']['tmpfs_opts'] = {}
-# config_opts['plugin_conf']['tmpfs_opts']['required_ram_mb'] = 1024
-# config_opts['plugin_conf']['tmpfs_opts']['max_fs_size'] = '768m'
-# config_opts['plugin_conf']['tmpfs_opts']['mode'] = '0755'
-# config_opts['plugin_conf']['tmpfs_opts']['keep_mounted'] = False
-#
-# config_opts['plugin_conf']['chroot_scan_enable'] = False
-# config_opts['plugin_conf']['chroot_scan_opts'] = {
-## Regexp of files which should be copied from buildroot to resultdir.
-#    'regexes': [ "^[^k]?core(\.\d+)?", "\.log$",],
-## If set to True files are copied only if build failed.
-#    'only_failed': True,
-#}
-#
-# lvm_root plugin is not enabled by default and is distributed in separate
-# subpackage mock-lvm. If you want to use it, it's recommended to disable the
-# root_cache plugin, otherwise you'd be caching twice.
-# config_opts['plugin_conf']['lvm_root_enable'] = False
-# config_opts['plugin_conf']['lvm_root_opts'] = {}
-# You need to give it a volume group with sufficient space. It won't touch any
-# of the existing logical volumes, so you can use the same volume group you use
-# for other purposes. It requires a name of the VG (not device path).
-# config_opts['plugin_conf']['lvm_root_opts']['volume_group'] = 'my_vg'
-# You need to specify the size that will mock's thinpool occupy. For regular
-# packages with small set of dependencies, 2G should suffice. For large packages
-# such as libreoffice, you should set it to at least 5 GB otherwise you may run
-# out of space and the build process will be blocked
-# config_opts['plugin_conf']['lvm_root_opts']['size'] = '2G'
-# You can specify alternative pool metadata size, format is the same as size.
-# Default value is determined by lvcreate based on size
-# config_opts['plugin_conf']['lvm_root_opts']['poolmetadatasize'] = None
-# When thin pool utilization is over 90% mock will refuse to continue.
-# Because once it reach 100% utilization weird things will happens.
-# config_opts['plugin_conf']['lvm_root_opts']['check_size'] = True
-
-### pm_request plugin can install packages requested from within the buildroot
-# It is disabled by default, as it affects build reproducibility. It can be enabled
-# by setting the following to True, but it's not advised to have it enabled globally.
-# It's better to enable it per build by using --enable-plugin pm_request
-# config_opts['plugin_conf']['pm_request_enable'] = False
-# config_opts['plugin_conf']['pm_request_opts'] = {}
-
-### If you want to compress mock log, enable this plugin
-# config_opts['plugin_conf']['compress_logs_enable'] = False
-# config_opts['plugin_conf']['compress_logs_opts'] = {}
-### Command used to compress logs - e.g. "/usr/bin/xz -9 --force"
-# config_opts['plugin_conf']['compress_logs_opts']['command'] = ""
-#
-# Configuration options for the sign plugin:
-# config_opts['plugin_conf']['sign_enable'] = False
-# config_opts['plugin_conf']['sign_opts'] = {}
-# config_opts['plugin_conf']['sign_opts']['cmd'] = 'rpmsign'
-# The options to pass to the signing command. %(rpms)s will be expanded to
-# the rpms in the results folder.
-# config_opts['plugin_conf']['sign_opts']['opts'] = '--addsign %(rpms)s -D "%%_gpg_name your_name" -D "%%_gpg_path /home/your_name/.gnupg'
-
-#############################################################################
-#
-# environment for chroot
-#
-# config_opts['environment']['TERM'] = 'vt100'
-# config_opts['environment']['SHELL'] = '/bin/bash'
-# config_opts['environment']['HOME'] = '/builddir'
-# config_opts['environment']['HOSTNAME'] = 'mock'
-# config_opts['environment']['PATH'] = '/usr/bin:/bin:/usr/sbin:/sbin'
-# config_opts['environment']['PROMPT_COMMAND'] = 'printf "\\033]0;<mock-chroot>\\007"'
-# config_opts['environment']['PS1'] = '<mock-chroot> \\s-\\v\\$ '
-# config_opts['environment']['LANG'] = os.environ.setdefault('LANG', 'en_US.UTF-8')
-# config_opts['environment']['TZ'] = os.environ.setdefault('TZ', 'EST5EDT')
-
-#############################################################################
-#
-# Things that you can change, but we dont recommend it:
-# config_opts['chroothome'] = '/builddir'
-# config_opts['clean'] = True
-## you could not really use substitution here so it will not work if overridden:
-# config['rootdir'] = '/var/lib/mock/<CONFIG>/root/'
-## This works in F25+ chroots. This overrides 'use_container_host_hostname' option
-# config_opts['macros']['%_buildhost'] = 'my.own.hostname'
-
-#############################################################################
-#
-# Things that must be adjusted if SCM integration is used:
-#
-# config_opts['scm'] = True
-# config_opts['scm_opts']['method'] = 'git'
-# config_opts['scm_opts']['cvs_get'] = 'cvs -d /srv/cvs co SCM_BRN SCM_PKG'
-# config_opts['scm_opts']['git_get'] = 'git clone SCM_BRN git://localhost/SCM_PKG.git SCM_PKG'
-# config_opts['scm_opts']['svn_get'] = 'svn co file:///srv/svn/SCM_PKG/SCM_BRN SCM_PKG'
-# config_opts['scm_opts']['spec'] = 'SCM_PKG.spec'
-# config_opts['scm_opts']['ext_src_dir'] = '/dev/null'
-# config_opts['scm_opts']['write_tar'] = True
-# config_opts['scm_opts']['git_timestamps'] = True
-# config_opts['scm_opts']['exclude_vcs'] = True
-
-# These options are also recognized but usually defined in cmd line
-# with --scm-option package=<pkg> --scm-option branch=<branch>
-# config_opts['scm_opts']['package'] = 'mypkg'
-# config_opts['scm_opts']['branch'] = 'master'
-
-#############################################################################
-#
-# Things that are best suited for individual chroot config files:
-#
-# MUST SET (in individual chroot cfg file):
-# config_opts['root'] = 'name-of-yum-build-dir'
-# Mock will set architecture to 'target_arch' using personality(2) syscall.
-# config_opts['target_arch'] = 'i386'
-# When host system architecture is not in 'legal_host_arches' list, mock will refuse to switch to
-# 'target_arch' and will raise error.
-# config_opts['legal_host_arches'] = ('i386', 'i586', 'i686', 'x86_64')
-# Contains content of $CHROOT/etc/yum/yum.conf or $CHROOT/etc/dnf/dnf.conf. If DNF is used and
-# 'dnf.conf' is not set, then content of 'yum.conf' is used to populate $CHROOT/etc/dnf/dnf.conf
-# config_opts['yum.conf'] = ''
-# or
-# config_opts['dnf.conf'] = ''
-# Important! You must use 'assumeyes=1' in yum/dnf.conf otherwise Mock will fail.
-#
-# Flip this if you want to get rid of warning message on systems which does not support DNF
-# Warning! Setting this to False will automatically use Yum on RHEL{6,7} platforms.
-# config_opts['dnf_warning'] = True
-#
-# CAN SET, defaults usually work ok:
-# config_opts['chroot_setup_cmd'] = 'install buildsys-build'
-# config_opts['chroot_additional_packages'] = ''
-# config_opts['log_config_file'] = 'logging.ini'
-# config_opts['more_buildreqs']['srpm_name-version-release'] = 'dependencies'
-# config_opts['macros']['%Add_your_macro_name_here'] = "add macro value here"
-# config_opts['files']['path/name/no/leading/slash'] = "put file contents here."
-# config_opts['chrootuid'] = os.getuid()
-# config_opts['releasever'] = '20'
-# config_opts['yum_common_opts'] = []
-# config_opts['dnf_common_opts'] = ['--disableplugin=local', '--setopt=deltarpm=false']
-# config_opts['yum_builddep_opts'] = ''
-# config_opts['dnf_builddep_opts'] = ''
-# config_opts['priorities.conf'] = 'put file contents here.'
-# config_opts['rhnplugin.conf'] = 'put file contents here.'
-# config_opts['subscription-manager.conf'] = 'put file contents here.'
-
-# If you change chrootgid, you must also change "mock" to the correct group
-# name in this line of the mock PAM config:
-#   auth  sufficient pam_succeed_if.so user ingroup mock use_uid quiet
-# config_opts['chrootgid'] = grp.getgrnam("mock")[2]
-
-# config_opts['useradd'] = '/usr/sbin/useradd -m -u %(uid)s -g %(gid)s -d %(home)s -n %(user)s' # Fedora/RedHat
-#
-# Security related
-# config_opts['no_root_shells'] = False
-#
-# Proxy settings (https_proxy, ftp_proxy, and no_proxy can also be set)
-# config_opts['http_proxy'] = 'http://localhost:3128'
-#
-# Extra dirs to be created when the chroot is initialized
-# This is just a list of strings representing chroot paths such as:
-#  [ '/run/lock', ]
-# config_opts['extra_chroot_dirs'] = []